With the Polystair Tool you can control the Going / Rise geometry of the Stair in the Flights and Landings section:
The three options are:
↧
Control Stair Going and Rise
↧
ARCHICAD 18 and 19 now Compatible with MAC OSX 10.11 El Capitan
GRAPHISOFT has recently released Updates for ARCHICAD 18 and 19. These Updates make these 2 versions compatible with the latest MAC OSX 10.11 El Capitan
For more information: http://helpcenter.graphisoft.com/technotes/operating-systems/mac-os-x-10-11-el-capitan-beta/
Please note: If you are using ARCHICAD versions 17 and older, 17 SOLO and older, SE 2014 and older: Do NOT upgrade your MAC OS to MAC OS X 10.11. These versions will not be supported on MAC OS 10.11.
↧
↧
White fills appearing as grey
White fills appearing in plan as grey are controlled via the Options> Work Environment> On Screen Options and uncheck the Automatic Pen Colour Visibility Adjustment for Model Views.
↧
What a Keynote Label can display
The components that make up a Cadimage Keynote Label are:
- Label Header – this is custom text you can enter
- Category – the category title for the group your keynote belongs to
- Key – the unique reference used by your keynote
- Title – the title / heading for your keynote
- Description – the detailed description of specification of the item you are listing
- Specification Reference – this can refer to an external systems reference different from your key
↧
Change the Garage Door Operation type
The Cadimage Garage Door has three types of Door Operation: Roller, Tilt Panel and Sectional Lift.
To set or change the Door Operation, either select an existing Garage Door or create a new one and go to Setout:
Clicking on the Door Operation button highlighted above will show the three options:
Choose the option you require and continue to configure the Garage Door. Click OK to exit the dialog and apply the changes when you are finished.
↧
↧
Objective Steel Presets
If you are using Objective and the built in Steel Library – remember to check the Presets…
The content varies as each component has different attributes – but here is an example from the Steel Column:
↧
Include or exclude Scales in Layout autotext
If you want to include or exclude the scale of a drawing in the Layout autotext for Scale
You can select the Settings of the drawing and go to Include Scale in Auto Text Indexes.
↧
Solid element operator Building Material
If you are creating an element or morph and using it as a Solid Element Operator, remember that there is a Building Material that has a high priority that will ensure that will be higher than any other material
↧
Linked DWG Layer visibility
When you place a DWG or DXF as a Linked Drawing (from File> External Content> Place External Drawing…) you can control the visibility of its layers.
Select the Embedded Drawing and go to its settings:
In the Properties Panel, click on Drawing’s own Layers to switch layers on or off.
↧
↧
Slab Edge Placement
When placing a Slab Edge with Objective, it is important to pick the correct placement – depending on where you click on a Slab edge (edge or point), you will get different results.
Picking on an edge creates the Slab Edge on only that one edge of slab:
Picking on an point creates the Slab Edge on the entire perimeter of the Slab:
↧
Rotating Lamps with Objective
When creating models, you occasionally come up against problems such as this:
Here we have three recessed ceiling spot lamps – but the ceiling is not horizontal and there is no way to rotate the third lamp in the angled ceiling… unless you use Cadimage Objective.
Create a section through the model so you can see the Lamp that needs to be rotated and select it.
Go to Objective> Tools> Rotate…
- click to define the first point of the rotation axis
- click to define the second point of the rotation axis
- click to enter the rotation angle
The process is very similar to the standard ARCHICAD rotate – except we are rotating in the section view.
Once completed you can see the transformation:
Please note: the Lamp remains fully parametric after the rotation
↧
Migrate Projects – don’t forget the Libraries
When Migrating a project from version to version, it is important to remember to Migrate the Libraries too.
When you first open a Project in a new version, the following dialog will appear…
All you need to do is hit the Migrate button… but what happens if you hit Skip? The project will likely open as normal – but if you try to use Cadimage Tools for example, you will encounter some problems. This is because the Project will be in the latest version – but will continue to use the old Library.
If you have skipped on the first dialog – don’t worry, it can easily be fixed by going to File> Libraries and Objects> Library Manager… and clicking the Migrate Libraries button highlighted below:
↧
Slab Edge end conditions
When you place a Slab Edge on just one edge of a Slab, the End Conditions can be adjusted to suit your requirements.
Select the place Slab Edge and go to Settings then End Conditions to pick what happens at each end:
↧
↧
ARCHICAD Connection for Revit 2016
GRAPHISOFT have released the Add-in for Revit 2016…
“The GRAPHISOFT ARCHICAD Connection is a free Add-In for Autodesk Revit softwares (including Revit Structure, Revit MEP and Revit Architecture). The Add-In improves the IFC model-based and bi-directional data exchange between GRAPHISOFT ARCHICAD and Autodesk Revit applications.”
For further information, please see this page: http://www.graphisoft.com/downloads/interoperability.html
↧
Editing Keynotes content
To edit the content of a Keynote (Key, Title, Spec or Description), select the Keynote you want to change and edit the fields in Keynote Editing shown below:
Any changes made to the fields are automatically saved to the database. However, if any of the keynotes have already been placed as Labels, you will need to run the Cadimage> Keynotes> Audit Labels… tool to ensure all Labels are updated with the latest data.
↧
Set Alignment of Cadimage Stairs
To set the Alignment of Stairs (Left, Right or Centre), use the Preview and Positioning Panel to pick on the appropriate hotspot:
↧
Avoid Wall Covering untidiness…
Avoid a situation like this with Wall Coverings in ARCHICAD:
In Layout> Ignore Shape Detail near Ends you can set a distance where the Covering can ignore the shape detail of the model:
This was introduced following ARCHICAD 17 to allow the control of the connection as walls now clash rather than mitre.
By setting the values to be the same as the connecting wall thickness, the result is as follows:
↧
↧
Control Plan View Display of Cadimage Stairs
To control the display of the Stair on Plan View, create a new Polystair or select an existing one and go to its settings. Navigate to the Floor Plan and Section Panel then FLOOR PLAN DISPLAY> Show on Stories as highlighted below:
The default option should be All Relevant Stories but it may be one of the following:
↧
Install the Cadimage Tool for ArchiCAD Educational
If you are running an EDU license of ArchiCAD 18 o 19 you can download and install the tools from our website mycadimage.com
Just download the Installer for the tools and when you run it you will find the Education and the Trial install options.
↧
Stair Favourites
Since the PolyStair tool was released for ARCHICAD 18 the use of Favorites has changed.
The tool doesn’t save the PolyStair as a standard AC Stair anymore, therefore the only way to get a Favorite is using the same PolyStair Icon in the Toolbox
As you can see in the sequence below, saving a selection as a Favorite for the PolyStair will require to place any polystair shape and then double click the Favorite from the palette so the favourited stair is applied.
↧